Showing all 9 results
0.45X Wide Angle Lens 67mm₱3,450.00
Built-in Macro lens for extreme close-up shots
Digital SLR Pro Lens
Professional High Definition: PHD Lens reduces glass flare & ghosting caused by reflections
Special Element Frame: Special matte aluminum satin finish frame reduces reflections & optimized photography
Premium Rimmed Glass: High quality rimmed glass reduces light reflection around lens edge
Infrared Compatible: For high resolution day & night recording
Lens Back Threads Size 58mm
AF / Infrared Compatible
High Quality Crystal Optics
Great for Every Type of Photographic Situation
Compatible with: All cameras & camcorders with a 58mm sized lens filter thread
Lens Composition: 2-2 fully Multi-Coated
Mount Thread: 58mm Straight
Black Rapid Buckle Cover – Buck₱750.00
- Fits all BlackRapid R series strap
- Wraps though and around the buckle
- Helps prevent the theft of the gear attached to the strap
- Ballistic nylon cover
- Duraflex acetal hardware
Black Rapid Tether Kit₱1,750.00
- Provides Extra Drop Protection
- Tether Attaches to Camera’s Lug
- Tether Also Mounts to CR2/FR3 Connectors
- Fully Adjustable Length
- Carabiner Mounts to Your Belt and Strap
Fuji Lens Hood for XF35mm f2 WR₱400.00
- prevent unwanted stray light
- extra protection from accidental impact
- compact and discrete
- lens cap can still be attached
JJC EYECUP DK28₱300.00
JJC Hot Shoe JSC2₱450.00
This is a hot shoe for portable flashes that features a PC female outlets
It has a &ldAquo;hot” contact on the top, and a shoe mount socket in the bottom.
This adapter allows you to connect a flash via PC Sync cord to the hot shoe of the camera. That is why the adapter is perfect for cameras which don’t have an own PC Sync socket. Additionally the adapter has a hot shoe at the topside, in which you can put an on-camera flash. So besides the flash, which is connected via cord, you can also trigger an on-camera flash. The adapter works with manual and TTL-compatible on-camera flashes. However, the adapter only transmits the trigger impulse. So in any case you have to set the flash exposure on the flash itself.
JJC MSA-11 Cold Shoe Screw Adapter with 1/4 inch Thread/Screw₱360.00
- Made of fine finish aluminum
- Fits most cameras with a standard hot shoe mount
- Converts the camera hot shoe mount to a 1/4″-20 male post
- Also converts a female threaded socket to 1/4″-20 male post
JJC MSA3 1/4-20 to Hot Shoe₱360.00
MSA-3 adapter fits on the hot shoe of most cameras, Canon, Nikon,, Pentax, Olympus, Panasonic, Fuji DSLRs
It terminates in a 1/4-20 threaded spud and is used as a Monitor Bracket or anything else that has a 1/4-20 receptacle.
Please note there is no electrical connection made with this adapter, it is a hot shoe mount only.
Yongnuo YNH3 Hotshoe Adapter for Sony₱800.00
Using Third Party Flash Gun & Flash Trigger Is Now Possible on Minolta or Sony DSLR SLR
-Since the hot shoe on Minolta or Sony DSLR SLR are different from conventional hot shoe, you could not use third party flash gunes with them.
-Problem is solved! You can now use this adapter to connect third party flash guns and flash trigger via standard hot shoe or a pc sync cord socket.
-Work with most third party flash guns with low triggering voltage.
-Support non-TTL auto mode or manual mode (TTL mode is disabled).
-Direct replacement for original Minolta adapter FS-1100 & Sony FA-HS1AM.
4-Pin Design To Protect Your Valuable Cameras
-Built-in protective circuit to protect your cameras from high voltage flash guns if you accidentally use one.
-4 pins contacts on hot shoe to camera and 3 pin contacts on hotshoe to flash guns.
Maxxum/Dynax/Alpha 7D, 5D, A200, A1, A2
Minolta Film Cameras:
Maxxum/Dynax/Alpha 9, 7, 5, 4, 3L, 60, 40, 800si, 700si, 9xi, 7xi, 8000i, 7000i
A100, A200, A230, A300, A330, A380, A350, A500, A550, A700, A850, A900